Cleaning & Chemicals

GT209 – THE SCRUBBER

Used to reach behind speakers and brake lights. Scrub away adhesive along the bottom edges of sloped rear windows. Uses replaceable standard White Scrub Pads (GT085) cut 2″x3″. This tool is 3″ wide by 15″ long.

GT071 – Virtually “Lint Free” Reusable Wipes

300 feet of reusable wipes.

GT085 – White Scrub Pad

Great for cleaning windows prior to installation.

GT085 THK – 1″ Thick Scrub Pad 6″x9″

Great for cleaning windows prior to installation.

GT072 – Wipe Dispenser

For use with GT070.

GT070 – Low Lint Wipes

GT160 – 19 oz Film Guard

Highly recommended for use after film installations as a cleaner and polish.  Helps reduce friction and condensation between film and rubber gaskets on roll-down windows.

MSDS SHEET

 

GT715 – Sprayway Glass Cleaner-19 oz

Ammonia free, film-friendly aerosol spray used for cleaning film surfaces after installation.  Can also be used as an adhesive remover when left to soak.

MSDS SHEET

GT716 – Plexus Plastic Polish-13 oz

Anti-static plastic polish- safe for all window films. Leaves behind a protective sheen on any plastic surface.

MSDS SHEET

GT733 – Dirt-Off Concentrate

1 quart concentrate cleaning solution.  Use for interior automotive window cleaning.  Great for removing oily deposits on automotive glass.  Dirt-Off can calso be used as an adhesive accelerant to give additional tack for dot matrix areas.

MSDS SHEET

GT714 – X-100 Mounting Solution

Cleaning and application concentrate for most dry adhesives.  The mild acid formulation makes this a great cleaning agent for glass contaminated with oil, grease or dirt.  NOT TO BE USED WITH COPPER OR SILVER BASED FILMS.

MSDS SHEET

GT162P – Pink Adhesive Remover

Gallon of concentrated adhesive remover.

MSDS SHEET

GT1071 – Super Stripper Adhesive Remover

Gallon of highly concentrated, ready to use adhesive remover.

MSDS SHEET

GT735 – Film-On Concentrate

1 quart concentrate mounting solution.  Use for pressure sensitive adhesives and sputtered copper films.

MSDS SHEET

GT1034 – Dot Devil- 32 oz

Dot matrix prep solution.  Use to aid film adhesion over dot matrix areas in auto installs.

MSDS SHEET

GT1035 – Blue Slip Up (Gallon)

Slip agent to aid in window film installation.

MSDS SHEET

GT1036 – Simple Pink (Gallon)

Adhesive remover.

MSDS SHEET

GT1039 – Rapid Remover – 32 oz

A non-toxic, water-soluable adhesive remover that breaks down and removes adhesive fast.

MSDS SHEET

GT1040 – Rapid Remover – Gallon

A non-toxic, water-soluable adhesive remover that breaks down and removes adhesive fast.

 

MSDS SHEET

GT1041 – Rapid Tac II – 32 oz

Great adhesive promoter even in cold weather conditions.  A great solution for dot matrix areas or with vinyl products.

 

MSDS SHEET

GT2009 – Tint Off Gallon

Ready to use and specially formulated for the window film industry to make tint removal a snap. 1 Gallon.

GT2010 – Tint Off Quarts

Ready to use and specially formulated for the window film industry to make tint removal a snap.  1 quart bottles.

MSDS SHEET

GT2013 – Tint Slime

Tint Slime is a window tint mounting & cleaning solution. Tint Slime can be used to install automotive window tint, paint protection film, flat glass film, and vinyl.  Tint Slime is free of particulates and won’t separate.  Tint Slime is safe for use on interiors, biodegradable, and of course, tint safe. Concentrate, mix 1 ounce per 1 gallon of water.

Mixology:  2 capfuls for 1 gallon. 1 capful for polyspray. 1/2 capful for 32 oz bottles (GT090 & GT097)

 

MSDS SHEET

 

GT1066 – Copper Mesh Pad

This copper scrub pad is for Dot Matrix prep ONLY. This pad will ABSOLUTELY scratch glass.