Squeegee Essentials

GT1049 – Gator Blade I

Features two opposing arched blades. The narrower blade allows for more scraping pressure for around rear defrosters and for adhesive removal on surfaces where metallic razor blades scratch surfaces.

GT1050 – Gator Blade II

Features three functional edges. The first 3.5″ linear edge is great for lifting bottom rollup gaskets while tucking the film safely beneath to reduce peeling. A long slender acute point works for reaching into tight corners of quarter windows and behind front and rear gaskets of roll-downs. The opposing 18″ radius edge is also 3.5″ wide and also functions well for lifting and tucking. The 1.95″ third edge features a 4″ radius blade that fits tighter curvature situations and is a good pressure concentration blade.

GT044BLUE – Blue Little Foot

This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee.

GT044 – Red Little Foot

This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee.

GT044BLACK – Black Little Foot

This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee.

GT1070 – Platinum Smart Card

The modern version of the hard card squeegee, only better! 25% wider than a hard card, with a tapered tip, comfortable grip and thin squeegee edge make it the smartest tool in your apron. Great for sliding under gaskets and seals. Use Smart Cardz anywhere you’d use hard card squeegees.

GT091 – Slammer

Used for cleaning corners and along gaskets, wicking water out along borders and easily reaches rear windows and sharp angled corners.

GT148 – 6″ Block Squeegee

Combination squeegee/hard card used for finishing during film installation.  Can be cut to various angle shapes to reach tight sharp corners.

GT149 – 12″ Block Squeegee

Combination squeegee/hard card used for finishing during film installation.  Can be cut to various angle shapes to reach tight sharp corners.

GT202 – The Conquerer

The Conquerer is the original corner reach tool.  Features a soft squeegee blade along one edge and point hard card tips on the ends making it a versatile staple to any tool kit.

GT202B – Blue Conquerer

Same as the original Conquerer (GT202) with a slightly harder durometer for more squeegeeing power.

GT256 – Yellow Power Stroke

The original handheld molded squeegee, designed to fit comfortably in your hand.  Measures 5.7″ from tip to tip.  The Yellow Power Stroke works well with dyed films and the first pass on metal films.

GT032G – Tail Fin Green (Soft)

Great for getting behind brake lights and back window applications.

GT066 – 6″ Clear Super Squeegee

Ideal for general purpose smoothing as well as pressure smoothing.  The consistency of the material produces great reults with minimal effort.

GT1025M – Rebel-Mango(Hard Flex)

We’ve married the traditional bump card to the shape of our popular Diamond Tip to create the Rebel Squeegee, this versatile hybrid squeegee tool works harder for you.  That’s because Rebel is both a great applicator and a great trim guide for flat glass.  The unique diagonal shape of Rebel lets you get into corners with ease plus you get all the features of a traditional bump cards, including parallel grip ridges and the firmness you need to bump edges.

GT068 – Hard Card Sharpener

A must have to keep hard card and other squeegee edges smooth.  Simply slide the squeegee edge along the tray to smooth out rough edges.  Uses a 1″ single edge blade.

GT113YELLOW – Yellow Diamond Tip(Firm Flex)

Designed to meet the challenge of hard-to-reach areas, with square edges and 20 degree angled corners on both sides.  The raised area in the center gives you a secure, slip-resistant grip, even when wet.  Made of a high heat-resistant material.

GT201G – Green Contour (Soft Flex)

Gives you curves where you need them.  Designed to match all those concave surfaces installers see every day.  A great fit for window film, paint protetion or vinyl installs.  The Contour hugs surfaces evenly while spreading radial pressure outward for quick film adhesion.  The elongated triangular shape gets in to all those hard-to-reach areas.

GT201PCH – Peach Contour

The Peach Contour has all the qualities you love about Contour but with a little something extra. The specially formulated material gives Peach Contour extra slip to glide smoothly. The edges are polished to help avoid any scratching.

GT201Y – Yellow Contour (Firm Flex)

Gives you curves where you need them.  Designed to match all those concave surfaces installers see every day.  A great fit for window film, paint protetion or vinyl installs.  The Contour hugs surfaces evenly while spreading radial pressure outward for quick film adhesion.  The elongated triangular shape gets in to all those hard-to-reach areas.

GT201PLT – Platinum Contour (Hard Flex)

Gives you curves where you need them.  Designed to match all those concave surfaces installers see every day.  A great fit for window film, paint protetion or vinyl installs.  The Contour hugs surfaces evenly while spreading radial pressure outward for quick film adhesion.  The elongated triangular shape gets in to all those hard-to-reach areas.

GT200GLD – EZ Reach Ultra Gold (Firm Flex)

Stop cutting down hard card squeegees and use this versatile tool instead.  These triangular cards with flat edges are perfect for putting down those little corners of film in hard to access areas. This gold version is flex-firm.

GT200PLT – EZ Reach Ultra Platinum (Hard Flex)

Stop cutting down hard card squeegees and use this versatile tool instead.  These triangular cards with flat edges are perfect for putting down those little corners of film in hard to access areas. The EZ Reach Ultra Platinum offers a hard card texture with internal lubrication technology to help prevent scratching.  EZ Reach is the ultimate corner tool.

GT151Y – Yellow Quick Foot (Hard Flex)

A stiff squeegee with a handle for jobs that require medium reach.  Slim and trim with an unwrapped handle.

GT151B – Blue Quick Foot (Firm Flex)

A stiff squeegee with a handle for jobs that require medium reach.  Slim and trim with an unwrapped handle.

GT151W – White Quick Foot (Firm Flex)

A stiff squeegee with a handle for jobs that require medium reach.  Slim and trim with an unwrapped handle.

GT1042 Red – Titan Squeegee

The overall length of 14 3/4 inches allows for great access to those hard to reach rear windows. The Titan’s rigid structure allows more removal of mounting solution and the finger placement at the top of the Titan allows for better control and comfort. The handle is designed to easily lift inner and upper door seals.

Watch a video of the Titan in use

GT088 – Bondo Squeegee

Flexible and soft card style squeegee.  Great for third brake light installs.

GT083W – White Chizzler

Ideal for removing decals, film or adhesive from sensitive surfaces. Use for pressing down small film creases or air bubbles. The White Chizzler is slightly larger, has thicker edges and is harder than the original pink “Lil Chizler”.

GT083 – Lil’ Chizler

Ideal for removing decals, film or adhesive from sensitive surfaces. Use for pressing down small film creases or air bubbles.

GT2003PLT – EZ Reach ORIGINAL Platinum

The durometer (hardness) is more than the gold and is just as popular!

GT2003 – EZ Reach ORIGINAL Gold

This is back by popular demand! New part number but same shape and design.

GT2042 Blue – Tri-Edge Blue

Tri-Edge Blue is a new tool in the industry with the latest technology that helps apply window film with ease. Its patented design high quality material makes this tool one of a kind. Its precision angles and comfort grip will allow the user to reach those challenging areas to achieve perfection. This tool has been analyzed and closely inspected to ensure that the finish is smooth, no more rough edges.

GT2042 Yellow – Tri-Edge Yellow

Tri-Edge Yellow is our next level tool. We have turned up the strength on the already great design. For those installers that prefer a slightly harder material, Tri-Edge Yellow will be sure to meet your needs.

GT2042 Orange – Tri-Edge Orange

Tri-Edge Orange is our most rigid tool yet. Look no further for the perfect tool to finish the job. Offering both strength and support, the Tri-Edge Orange has strong edges that will finish off those hard to smooth creases.

GT2043N – Tri-Edge Plus

NOW NEW & IMPROVED LARGER VERSION.  

The perfect design of the Tri-Edge Plus just got better.  The tool is now 10% larger than the regular Tri-Edge, there are finger grips on both sides and the rubber squeegee edge has been upgraded!   The rubberized blade was carefully designed to create a dry line on the glass at the bottom of the film. The design team has found the solution to help prevent dusty water from returning to any open bubbles.

GT083 Yellow – Dura Chisel

Ideal for removing decals, film or adhesive from sensitive surfaces.  Use for pressing down small film creases or air bubbles.

GT2063 BLUE – Tri-Edge X Blue

Tri-Edge X  Blue is a new larger size of the GT2042 Blue.   The angles have been recalculated and extended into a bigger tool.  All of the durability and quality of the Tri-Edge tool is now made to make those deep gaskets and hard to reach sports more accessible.

GT2063 Yellow – Tri-Edge X Yellow

Tri-Edge X  Yellow is a new larger size of the GT2042 Yellow.   The angles have been recalculated and extended into a bigger tool.  All of the durability and quality of the Tri-Edge tool is now made to make those deep gaskets and hard to reach sports more accessible.

GT2063 ORANGE – Tri-Edge X Orange

Tri-Edge X  Orange is a new larger size of the GT2042 Orange.   The angles have been recalculated and extended into a bigger tool.  All of the durability and quality of the Tri-Edge tool is now made to make those deep gaskets and hard to reach sports more accessible.

GT2063 Pink – Tri-Edge X Pink

Tri-Edge has taken the design of the Tri-Edge X and developed a material that is sure to beat the competition.  The new rubberized, heat resistant material is designed to squeegee water and to smooth film in hard to reach places.  This newly formulated material works best on wet surfaces.

GT060 – EZ WING LIME

The first thing that differentiates the EZ Wing from products like the EZ Reach or EZ Reach Ultra is the unique chizler tip that enables you to flip it over to chizel out those stubborn creases or dust spots. The second feature of the new EZ Wing is the increased stiffness across the nose of the tool. This will allow you to apply more pressure out at the tip in those situation where you are reaching into a tight spot.

The last, and most exciting, new feature of the EZ Wing is the integration of Control Contour Technology (CCT). This technology is found in the slightly curved main edge of the EZ Wing. The curved edge is designed to enable the tool to encourage a finger or bubble to disperse outward, which reduces the likelihood of a crease.

GT060 – EZ WING PEACH

The EZ Wing Peach is made with a specially formulated material that allows the tool an extra smoothness when being used. The polished edges help prevent scratching.

GT2072-4 – 4″ Lime Speed Wing(Firm)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2072-6 – 6″ Lime Speed Wing(Firm)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2072-8 – 8″ Lime Speed Wing(Firm)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2076-4 – 4″ Lemon Speed Wing(Medium)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2076-6 – 6″ Lemon Speed Wing(Medium)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2076-8 – 8″ Lemon Speed Wing(Medium)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2077-4 – 4″ Cherry Speed Wing(Soft)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2077-6 – 6″ Cherry Speed Wing(Soft)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2077-8 – 8″ Cherry Speed Wing(Soft)

The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards.  The Speed Wing comes with one flat edge and one curved edge.  Speed Wings is made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath.

GT2143 – 5″ Big Mouth 3/8″ Thick Single Bevel Squeegee Blade

The 3/8 inch thick blades are ideal for thick security films, graffiti films, hurricane/ bomb blast films, and windshield protection films. It is a much stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of the installer. This version has a beveled edge. Use with a Big Mouth Handle.

GT2144 – 8″ Big Mouth 3/8″ Thick Single Bevel Squeegee Blade

The 3/8 inch thick blades are ideal for thick security films, graffiti films, hurricane/ bomb blast films, and windshield protection films. It is a much stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of the installer. This version has a beveled edge. Use with a Big Mouth Handle.

GT083YL – Lidco Soft Yellow Chisler

Lidco Soft Yellow Chisler.  Ideal for removing decals, film or adhesive from sensitive surfaces. Use for pressing down small film creases or air bubbles.

GT2150 YELLOW – Yellow Reflex

Reflex is an ergonomic corner hard card designed with everyday use in mind. The sleek rounded design features wide finger anchors for ultimate grip control to minimize chances of dropping the tool. We’ve also integrated a comfortable index finger rest position towards the tip of the corner so you have the most precise command over your install. The Yellow Material is not only vibrant and eye catching so you can easily spot the tool in dark areas, but also hard to give you the firm push your final product deserves on every job.

GT2150 GOLD – Gold Reflex

Reflex is an ergonomic corner hard card designed with everyday use in mind. The sleek rounded design features wide finger anchors for ultimate grip control to minimize chances of dropping the tool. We’ve also integrated a comfortable index finger rest position towards the tip of the corner so you have the most precise command over your install.

GT2151 YELLOW – Yellow Side Piece

The Fusion Side Piece is the corner tool you’ve been asking for. Side Piece corner tool features raised finger grips but still retains a smooth in-hand feel. There is an indented index finger rest position for maximum control which minimizes the chance of dropping the card.

GT2151 GOLD – Gold Side Piece

The Fusion Side Piece is the corner tool you’ve been asking for. Side Piece corner tool features raised finger grips but still retains a smooth in-hand feel. There is an indented index finger rest position for maximum control which minimizes the chance of dropping the card.

GT2152 Fuschia – Tri-Edge XL

Tri-Edge XL is designed for tucking window film between tight door gaskets and glass.  The longest edge is 6.5 inches long.  Tri-Edge XL is hard with a soft touch and flexible which makes those deep hard to reach spots more accessible.

GT2152 Red- Tri-Edge XL Red

Tri-Edge XL is designed for tucking window film between tight door gaskets and glass.  The longest edge is 6.5 inches long.  Tri-Edge XL is hard with a soft touch and flexible which makes those deep hard to reach spots more accessible.

GT2150 ORANGE – Orange Reflex

Reflex is an ergonomic corner hard card designed with everyday use in mind. The sleek rounded design features wide finger anchors for ultimate grip control to minimize chances of dropping the tool. Reflex has a comfortable index finger rest position towards the tip of the corner for precise control. Orange is self-lubricating.

GT2151 ORANGE – Orange Side Piece

The Fusion Side Piece is the corner tool you’ve been asking for. Side Piece corner tool features raised finger grips but retains a smooth in-hand feel. An indented finger rest position for maximum control minimizes the change of dropping the card. Orange is self-lubricating.

GT023 – Doo Dad

Doo Dad is a unique multi-functional, super lubricated, plastic scraper. This tool offers several installer friendly features such as

  • Easily reach tight places
  • Scratch resistant
  • Lift and pry tool
  • 360 degree usable synthetic razor surfaces
  • Perfect lifting tool for rubber gaskets, clips and more
  • The rounded end acts like a “plow” to enhance sticker scraping

GT1025C – Rebel Cherry

A hybrid of the bump card and Diamond Tip.  Great as an applicator or use as a trim guide on flat glass.  Rebel has a unique diagonal shape, reaching corners easily.  The parallel grip ridges make holding the Rebel easy.  Cherry is medium-soft.

GT1025T – Rebel Turquoise

A hybrid of the bump card and Diamond Tip.  Great as an applicator or use as a trim guide on flat glass.  Rebel has a unique diagonal shape, reaching corners easily.  The parallel grip ridges make holding the Rebel easy.  Turquoise is soft.

GT046B – Bullet Applicator-Black

Introducing the Bullet Applicator from Pro Tools Now, the ultimate precision tool for flawless
installation of Paint Protection Films, Sign & Vinyl Graphics, and Window Film. The Bullet Applicator is
installer-friendly with these key features:
o Contours to all surfaces.
o Perfect for “bumping” the film’s edge.
o Gentle precise edge prevents scratches.
o Efficiently pushes out trapped air and moisture.
o The parallel “bumps” provide a slip-resistant grip.

Black is the most rigid of the Bullet Applicators ensuring maximum control and performance for heat shrinking window film.

GT1070BLK – Smart Card-Black

Smart Card is the modern version of the hard card squeegee, only better! 25% wider than a hard card, with a tapered tip, comfortable grip and thin squeegee edge make it the smartest tool in your apron. Great for sliding under gaskets and seals. Use Smart Cardz anywhere you would use a hard cardsqueegee. The Black Smart Card is softer than the popular Platinum version.

GT2150R – Red Glass Saver Reflex

Reflex is an ergonomic corner hard card designed with everyday use in mind. The sleek rounded design features wide finger anchors for ultimate grip control to minimize chances of dropping the tool. Reflex has a comfortable index finger rest position towards the tip of the corner for precise control. The Red Glass Saver is extremely hard and designed for cleaning glass surfaces. Red
should not be used on window film.

GT2151R – Red Glass Saver Side Piece

The Fusion Side Piece is the corner tool you’ve been asking for. Side Piece corner tool features raised finger grips but still retains a smooth in-hand feel. There is an indented finger rest position for maximum control which minimizes the chance of dropping the card.  Red Side Piece is extremely hard and designed for cleaning glass surfaces. Red should not be used on window film.

Facebook
Instagram