The new Scrub-It by Tri-Edge is coming early to Mid-November. Order now to receive the first available!
The SCRUB-IT is a hand-held scrubbing tool that uses the leverage of the back of your hand to clean glass from contaminants or adhesive residue. The SCRUB-IT allows you to use your hand to reach in most places and scrub evenly throughout. Scrub-It is a one size fits all as it can be adjusted to all hand sizes with the attached Velcro strap.
The Scrub-It pads are available in two styles.
• The Green Scrub-It (GT2120G) comes with a Tan color scrub pad that is great for every day cleaning and prep work.
Replacement pads are available in 10 packs as GT2121B & GT2121T but each tool comes with one scrub pad. Both pads are made of scratch resistant material but use with caution. Test on a small part of glass before use as not all glass is made the same!
*Please make sure to check newer vehicles for factory coatings that are applied to the inside of the glass that might be damaged by the Scrub-It.
GT2120G SCRUB-IT GREEN/TAN PAD
GT2120B SCRUB-IT BLUE/BLUE PAD
GT2121B SCRUB-IT PADS- BLUE (10 PACK)
GT2121T SCRUB-IT PADS-TAN (10 PACK)
Why is a Big Mouth Blade a good idea? The 3/8″ thick blades are ideal for thick security films, graffiti films, hurricane/ bomb blast films, and windshield protection films. It is a much stiffer option designed to optimize solution extraction while not putting more pressure on the back and arms of the installer.
GT2117 5” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE
GT2118 8” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE
Make your Big Mouth Blade work even better. One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8″ Blades are the solution to that problem by taking more of the force required to adequately finish the job off the installer and onto the tool.
We are now stocking the gallon size of Spider Spit. Spider Spit is a specially created formula for application of PPF and wet install vinyl films. Contains no particulates, no degreasers, lanolin or harsh chemicals that weaken the performance of your products. Slips when you need it to and tacks quickly. Mixing ration: 1 ounce per gallon of water. Distilled water works best! Order today as part number GT2119. Four gallons per case.
GDI is now stocking the GT1058S- 5″ Fusion Shorty Handle. A revised version of the GT1058- 5″ Fusion Short Handle. This version is without the collar around the top of the handle. Designed to optimize your leverage in removing mounting solution. Holds any of the 5″ squeegee blades. Great for high performance automotive films and smaller residential windows.
GDI Tools is proud to add The Fusion Red Line to our product offering. These new extractor blades are a 95 durometer and come with great choices to fit any installation need. Move more liquid with every pass using these new Red Line Blades. Don’t forget to pair with your favorite Fusion Handle!
GT2114A is 5″ wide, 1/4″ thick with a single bevel and cropped sides.
GT2114B is 5″ wide, 1/4″ thick and no bevel. This allows you 4 working edges.
GT2115 is 8″ wide, 1/4″ thick with a double bevel.
GT2115B is 8″ wide, 1/4″ thick with no bevel.
Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee. The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. With three different durometers the Suede Blade will meet all your application needs. MADE IN THE USA.
GDI Tools is now stocking the new PEACH line from Pro Tools Now.Pro Tools Now has developed a proprietary blend of polymers that make the New Peach Line of tools that glide across film in a way previously impossible. In addition, each tool in the Peach Line comes with hand polished edges to assure you have the smoothest installation edge possible. The Peach Line is available as Hard Card, Contour and EZ Wing.
The window tinting industries first and only absorbent rope braid used for absorbing water running down behind the dash of a vehicle while installing film. Helping to protect the electronics and other parts from water damage.
The SoakShield rope is also used to collect the water that would absorb into the top layer of what the dashboard is covered in. Example: Leather, Suede, Vinyl, and Cloth. When water is left to sit on the edges of the dash it can cause the material to unglue and curl up on the edges, damaging the whole dashboard.
Made of microfiber strands braided together by hand for window tinters by tinters. Used by Installers World Wide.
This braided Absorbent rope is tucked between the bottom of the windshield and the dashboard to stop and soak up the water running down behind the dash and causing issues with electronics.
• Original Standard size is 5-6′ long depending on stretching it out during installation. Great for your average coupe, sedan, compact SUV.
• Our XL size SoakShield rope able to extend the dash on larger Cars, Trucks, Vans, and SUVs. 18” longer than Original.
• The Mini size SoakShield is the same length as the original only 30% thinner. Able to fit better it tight gap spaced. Works great for back windows also.
• Ends coated to prevent Frey of strands.
• 90-day free replacement if defect from workmanship.
• Machine Washable.
• Hand Made in the USA, By Tinters for Tinters
GDI Tools is always proud to offer the most new and exciting tools and accessories to the industry. Make sure you keep in the know! Click the image below to download a pdf of the newest offerings!
The ever popular Go Doctor Squeegee now has a new blade option. The Dual Density blade (GT2057D) is double sided and reversible. Get two blades for the price of one. 85A RED, 95A BLUE.
“We love it! The most water removal on the first pass of any squeegee we have used. Nice that it has no metal parts. Comfy handle. Thank you!” – Schaan Bouchard – Bouchard’s Window Tint
“I’m old School so I have always used the blue max with a metal handle…Not any more” – Chad Bushmire Clean Ride Plus
“The Dual Density Blade should be a must have for every window tinter out there. Now I must get a few more so my guys are not fighting over the one we have. 5 out of 5 stars” – Craig W. Art of Tint of St. Albans
“This thicker edge may also have something to do with the blade moving the water as well as it does, almost like having a flat glass squeegee, for automotive applications”,“keep the innovations coming”… Dennis Robinson – Victory Glass Tinting
“I will say that the GO DOCTOR squeegee is my favorite tool and when I talk to any tinters I always recommend it.” Tyler T. Phoenix, Arizona
This new and innovative tool was born from the frustration of installers when they have to redo a window because a tool with a bad edge scratched film. This tool is designed to effectively and evenly smooth out the edge of most tools used for film installation. It works great on plastic and rubber tools.
Smooth-It comes in two varieties. The black mat is a medium fabric that works best and faster on big or deep scratches in the tool’s edge. The grey mat is a fine fabric that is ideal for removing small or light scratches from the tool.
Order Smooth-It today as part numbers:
GT2081B- SMOOTH-IT w/ BLACK MAT
GT2081G- SMOOTH-IT w/ GREY MAT
GT2082B- SMOOTH-IT MAT BLACK (3 PACK)
GT2082G- SMOOTH-IT MAT GREY (3 PACK)
GDI has added the entire selection of the new Fusion Turbo Pro Squeegees to our product offering. These new Fusion Turbo Pro Squeegees come in a variety of colors and durometers to cover any need that may arise.
The entire list of part numbers and descriptions can be viewed at the link below
Have you seen the latest from Fusion Tint Tools? We have added several new items to our catalog from this product line. Be sure to check out these new blades and handles today.
The Yellow Flat Out Squeegees (GT260 & GT261) are available in both 5” and 8” length. Slightly harder than the Orange Crush and comparable in hardness to the Blue Max products they work great in flat glass and security applications. For best results try in Fusion Handle, Fusion Stretch series and Thor’s Hammer.
The Fusion Stretch Handles come in 5″ (GT057) and 8″ (GT058). The Fusion Stretch handle is the latest design for installing flat glass and security films. This handle features a 14 ½” metal extension and two rubber grip sections for maximum water removal.
The Fusion Hand Dee Tool (GT037) is a MAGNETIC handle that can accommodate any 5”x 2” squeegee. Equipped with a removable “jaw” and a rounded grip to fit perfectly in your hand.
The Pink Clean (GT939) Pink Clean is a 5” Cropped squeegee blade. Pink Clean is the softest blade from Fusion Tint Tools. This blade is specifically designed with cleaning in mind. It is recommended to use the Pink Clean squeegee blade to easily swipe liquids away with minimal pressure applied by the user.
This tool is designed to effectively squeegee water from the most difficult places to reach. THE REACH allows you to squeegee water from the bottom of the back window or windshield, with ease.
THE REACH is made with a special formulated plastic and rubber in order to achieve the necessary stiffness and durability of its four edges. This tool is 16 3/4 inches in length, and built with a THE REACH is made with a special formulated plastic and rubber in order to achieve the necessary stiffness and durability of its four edges. This tool is 16 3/4 inches in length, and built with a double rubber blade on each side. One side of the tool provides an excellent grip, while the other side uses both edges to squeegee the water out; one pushes the water and the other drags the water. This tool is completely adaptable with two different radiuses of curvature at each side; in other words, one side is stiffer than the other.
We have updated the pdf version of our tool catalog to include the many new items added over the past year. View and or download the latest GDI Tools Catalog here. This is a large file, please allow time to download.
The Extruder is a revolutionary product improvement on an old industry favorite. Click the image below for more information or HERE for a video.
The new EZ Wing Lime Squeegee Reach Tool offers all of the benefits of a traditional triangle squeegee tool, but offers some new features as well.
The first difference in EZ Wing Lime from a product like the EZ Reach or EZ Reach Ultra is the unique chizzler tip that enables you to flip it over to chisel out those stubborn creases or dust spots. The second feature of the new EZ Wing Lime is the increased stiffness across the nose of the tool. This will allow you to apply more pressure out at the tip in those situation where you are reaching into a tight spot.
The last, and most exciting, new feature of the EZ Wing Lime is the integration of Pro Tools Now’s Control Contour Technology (CCT). This technology is found in the slightly curved main edge of the EZ Wing. The curved edge is designed to enable the tool to encourage a finger or bubble to disperse outward, which reduces the likelihood of a crease.
Click the image below to see a video detail all the great features of the new EZ Wing Lime tool.
The Speed Wing is designed with “wings” to enable the installer to reach areas typically out of the reach of most bump, bondo, teflon and hard cards. The Speed Wing comes with one flat edge and one curved edge. Speed Wings are made from materials that enable it to slide across most film surfaces easily while maintaining its rigidity to lay the material flat and remove moisture or air trapped underneath. Speed Wing comes in three convenient sizes: 4″, 6″ & 8″. Use part numbers GT2072-4, GT2072-6 & GT2072-8 when ordering. Click the image below to view an informational video.
Clean Cut has made many improvements that make precise cutting of not only traditional window films, but also security window films, paint protection films, vinyl graphic and car wrap material easier than ever!
*The bar now fits securely on the inner box, eliminating the need for the Box Wedge to keep things snug.
*An all new cutter head features much stronger magnets to keep the head securely where you place it no matter what material you are cutting.
*Best of all, this complete redesign has enabled us to provide you with this improved system at a price lower than the previous version.
Watch a video by clicking the logo below to see how the system has improved.